The sectors of use mentioned below summarize the main activities that can be implemented with SANAGEB products, both in new buildings and in those aimed at the more delicate aspects of the restoration and conservation of monumental buildings.
Claytex
Flexible, self-anchoring waterproofing mats for the active waterproofing of below-grade structures, containing a uniform layer of granular sodium bentonite with a high montmorillonite content, amounting to 5.0 kg/m², consisting of a needle-punched geotextile with nylon fibres interfaced with 100% by weight non-woven geotextile. Claytex is supplied in two different sizes: Claytex 120 = 1.20 x 5 m rolls (6 m²), weighing approximately 32 kg per roll, and Claytex 250 = 2.50 x 20 m rolls (50 m²), weighing approximately 270 kg per roll.
Claytex
Flexible, self-anchoring waterproofing mats for the active waterproofing of below-grade structures, containing a uniform layer of granular sodium bentonite with a high montmorillonite content, amounting to 5.0 kg/m², consisting of a needle-punched geotextile with nylon fibres interfaced with 100% by weight non-woven geotextile. Claytex is supplied in two different sizes: Claytex 120 = 1.20 x 5 m rolls (6 m²), weighing approximately 32 kg per roll, and Claytex 250 = 2.50 x 20 m rolls (50 m²), weighing approximately 270 kg per roll.
Armaglass Connector SINGLE
Alkali-resistant glass fibre connector with a rigid preformed central section and a single open, fan-out end. Suitable for the structural reinforcement of masonry, brickwork arches and vaults made of clay brick, tuff and stone, in combination with ARMAGLASS STRUCTURA glass fibre meshes and Unisan, Intosana and REPAR family mortars.
Armaglass Connector SINGLE
Alkali-resistant glass fibre connector with a rigid preformed central section and a single open, fan-out end. Suitable for the structural reinforcement of masonry, brickwork arches and vaults made of clay brick, tuff and stone, in combination with ARMAGLASS STRUCTURA glass fibre meshes and Unisan, Intosana and REPAR family mortars.
Clayseal 25.20
Hydroexpansive, preformed sealing waterstop for watertight construction joints in structures, masonry and foundations, made from a blend of sodium bentonite, hydroexpansive rubber and special binding polymers ("hydrocarbon"). Clayseal 25.20 has a rectangular 25x20 mm cross-section and is supplied in 5 m rolls. One box of Clayseal 25.20 contains 6 rolls of 5 metres each and weighs approximately 21 kg.
Clayseal 25.20
Hydroexpansive, preformed sealing waterstop for watertight construction joints in structures, masonry and foundations, made from a blend of sodium bentonite, hydroexpansive rubber and special binding polymers ("hydrocarbon"). Clayseal 25.20 has a rectangular 25x20 mm cross-section and is supplied in 5 m rolls. One box of Clayseal 25.20 contains 6 rolls of 5 metres each and weighs approximately 21 kg.
Clayseal 25.20 SW
Preformed hydroexpansive sealing waterstop joint for reliably watertight construction joints in structures, masonry and foundations, made from a blend of sodium bentonite, hydroexpansive rubber and special binding polymers ("hydrocarbon"), specifically designed for use in contact with salt water or organic leachates. Clayseal 25.20 SW has a rectangular cross-section of 25 x 20 mm and is supplied in 5 m rolls. A box of Clayseal 25.20 SW contains 6 rolls of 5 metres each and weighs approximately 21 kg.
Clayseal 25.20 SW
Preformed hydroexpansive sealing waterstop joint for reliably watertight construction joints in structures, masonry and foundations, made from a blend of sodium bentonite, hydroexpansive rubber and special binding polymers ("hydrocarbon"), specifically designed for use in contact with salt water or organic leachates. Clayseal 25.20 SW has a rectangular cross-section of 25 x 20 mm and is supplied in 5 m rolls. A box of Clayseal 25.20 SW contains 6 rolls of 5 metres each and weighs approximately 21 kg.
Bentonet
Preformed square-mesh steel cage, trapezoidal in shape and open on one side, designed to facilitate the correct positioning of Clayseal 25.20 sodium bentonite waterstops and prevent them from shifting from their intended position, especially in complex situations or on surfaces that have not been perfectly prepared. Once the joint has been installed, Bentonet must be fixed to the concrete substrate using steel nails and washers at 20–25 cm intervals.
Bentonet
Preformed square-mesh steel cage, trapezoidal in shape and open on one side, designed to facilitate the correct positioning of Clayseal 25.20 sodium bentonite waterstops and prevent them from shifting from their intended position, especially in complex situations or on surfaces that have not been perfectly prepared. Once the joint has been installed, Bentonet must be fixed to the concrete substrate using steel nails and washers at 20–25 cm intervals.
Claygrain
Claygrain is a loose, anhydrous powdered sodium bentonite, characterised by a montmorillonite content exceeding 90%, with a low yield point. The product can be used as supplied or mixed with water, cement and admixtures to obtain mixes with different consistency levels for waterproofing works and various geotechnical applications.
Claygrain
Claygrain is a loose, anhydrous powdered sodium bentonite, characterised by a montmorillonite content exceeding 90%, with a low yield point. The product can be used as supplied or mixed with water, cement and admixtures to obtain mixes with different consistency levels for waterproofing works and various geotechnical applications.
Osmosana
Trowel- or brush-applied osmotic mortar based on natural hydraulic lime NHL 3.5, hydrated lime, kaolin, aggregates with a maximum diameter of 0.5 mm consisting of siliceous materials (spheroidal quartz and siliceous rocks) and calcareous materials (ground marble and carbonate rocks), and alkali silicates. Ideal for creating waterproofing skim coats on porous and demonstrably absorbent masonry substrates (clay brickwork, renders, natural stone, etc.) in sustainable building projects and the restoration of period and listed buildings. Suitable for waterproofing treatments on exposed external masonry in brick or mixed construction. Treatments to prevent rising damp before the construction of screeds.
Osmosana
Trowel- or brush-applied osmotic mortar based on natural hydraulic lime NHL 3.5, hydrated lime, kaolin, aggregates with a maximum diameter of 0.5 mm consisting of siliceous materials (spheroidal quartz and siliceous rocks) and calcareous materials (ground marble and carbonate rocks), and alkali silicates. Ideal for creating waterproofing skim coats on porous and demonstrably absorbent masonry substrates (clay brickwork, renders, natural stone, etc.) in sustainable building projects and the restoration of period and listed buildings. Suitable for waterproofing treatments on exposed external masonry in brick or mixed construction. Treatments to prevent rising damp before the construction of screeds.
Mikrosana
Mikrosana is a cement-free binder blend recommended for consolidation grouting of brick, stone or mixed masonry structures. Its hydraulic setting is based on the lime–reactive microsilica reaction and the presence of hydraulic limes free from harmful soluble salts. Its exceptional flowability, combined with the extremely small particle size, allows it to penetrate pores or cracks less than 1.5 mm wide. Thanks to its constituents, Mikrosana is fully compatible with “historic” mortars and is particularly recommended for consolidation grouting of historic renders, including those with frescoes.
Mikrosana
Mikrosana is a cement-free binder blend recommended for consolidation grouting of brick, stone or mixed masonry structures. Its hydraulic setting is based on the lime–reactive microsilica reaction and the presence of hydraulic limes free from harmful soluble salts. Its exceptional flowability, combined with the extremely small particle size, allows it to penetrate pores or cracks less than 1.5 mm wide. Thanks to its constituents, Mikrosana is fully compatible with “historic” mortars and is particularly recommended for consolidation grouting of historic renders, including those with frescoes.
Sanafluens
Ready-to-use powder preparation based on lime, hydraulic binders, pozzolanic-active fillers, marble powders and special shrinkage-compensating and anti-segregation additives. By simply adding water, it can be used to prepare injectable and pourable grouts for masonry consolidation, offering extremely high performance in terms of flowability, strength and stability, in green building applications and the restoration of historic and monumental buildings. The high hydraulicity index achieved through the pozzolanic-active fillers ensures extremely high durability, even on permanently damp masonry.
Sanafluens
Ready-to-use powder preparation based on lime, hydraulic binders, pozzolanic-active fillers, marble powders and special shrinkage-compensating and anti-segregation additives. By simply adding water, it can be used to prepare injectable and pourable grouts for masonry consolidation, offering extremely high performance in terms of flowability, strength and stability, in green building applications and the restoration of historic and monumental buildings. The high hydraulicity index achieved through the pozzolanic-active fillers ensures extremely high durability, even on permanently damp masonry.
Calcesana Nocciola
Natural hydraulic lime NHL 3.5, hazelnut colour, obtained by firing selected calcareous marls of consistent quality at 1100°C in a traditional layered kiln. Specifically formulated for producing mortars, renders and screeds for bio-building applications and historic and monumental restoration works. The absence of clinker compounds and the high free lime content result in slow, gradual setting, with a continuous increase in mechanical strength over the months following application.
Calcesana Nocciola
Natural hydraulic lime NHL 3.5, hazelnut colour, obtained by firing selected calcareous marls of consistent quality at 1100°C in a traditional layered kiln. Specifically formulated for producing mortars, renders and screeds for bio-building applications and historic and monumental restoration works. The absence of clinker compounds and the high free lime content result in slow, gradual setting, with a continuous increase in mechanical strength over the months following application.
Calcesana Bianca
Natural hydraulic lime, white coloured, obtained through firing, in a vertical oven in refractory stone and bricks, at temperatures of 1100°C, of constant quality select marly limestones, specific for mortars, plasters and substrate screeds in ecological building works and in interventions of historical and monument restoration.
Calcesana Bianca
Natural hydraulic lime, white coloured, obtained through firing, in a vertical oven in refractory stone and bricks, at temperatures of 1100°C, of constant quality select marly limestones, specific for mortars, plasters and substrate screeds in ecological building works and in interventions of historical and monument restoration.
Sanalink
Fiber-reinforced mortar based on natural hydraulic lime NHL 3.5 and lightweight natural aggregates (pumice). It offers high water vapour permeability, low density (reduced thermal conductivity) and limited water permeability. Ideal as a bedding mortar for constructing internal and external walls and masonry in new buildings, the renovation of existing buildings, sustainable construction projects and the restoration of historic and listed buildings, including for pointing and filling joints and gaps.
Sanalink
Fiber-reinforced mortar based on natural hydraulic lime NHL 3.5 and lightweight natural aggregates (pumice). It offers high water vapour permeability, low density (reduced thermal conductivity) and limited water permeability. Ideal as a bedding mortar for constructing internal and external walls and masonry in new buildings, the renovation of existing buildings, sustainable construction projects and the restoration of historic and listed buildings, including for pointing and filling joints and gaps.
Intosana
Premixed, fibre-reinforced, breathable plaster based on natural hydraulic lime NHL 3.5, for coating and repairing interior and exterior walls and masonry in existing buildings, bio-building projects, new construction and the restoration of historic and listed buildings.
Intosana
Premixed, fibre-reinforced, breathable plaster based on natural hydraulic lime NHL 3.5, for coating and repairing interior and exterior walls and masonry in existing buildings, bio-building projects, new construction and the restoration of historic and listed buildings.
Sanafirm
Thixotropic, fibre-reinforced adhesive compound based on hydraulic lime, with rapid setting, for fixing and anchoring structures, inserts, plates, frames, bars, sanitary fixtures, etc. into masonry, for sustainable building projects, new construction and the restoration of historic and listed buildings.
Sanafirm
Thixotropic, fibre-reinforced adhesive compound based on hydraulic lime, with rapid setting, for fixing and anchoring structures, inserts, plates, frames, bars, sanitary fixtures, etc. into masonry, for sustainable building projects, new construction and the restoration of historic and listed buildings.
Sanazieg
Highly breathable and workable adhesive mortar based on hydraulic lime and microsilica with pozzolanic reactivity, for filling joints between stone elements, bricks, mouldings, decorative artefacts, etc., in green building applications, new construction and the restoration of period and monumental buildings. It can be mixed with colouring earths, decorative aggregates, etc.
Sanazieg
Highly breathable and workable adhesive mortar based on hydraulic lime and microsilica with pozzolanic reactivity, for filling joints between stone elements, bricks, mouldings, decorative artefacts, etc., in green building applications, new construction and the restoration of period and monumental buildings. It can be mixed with colouring earths, decorative aggregates, etc.
Latersana
Supplementary material based on ground “old” bricks and roof tiles, to be added to hydraulic lime and aggregate mixes for producing mortars, renders and underfloor screeds similar to traditional cocciopesto mixes, for green building applications and the restoration of period and historic buildings and monuments.
Latersana
Supplementary material based on ground “old” bricks and roof tiles, to be added to hydraulic lime and aggregate mixes for producing mortars, renders and underfloor screeds similar to traditional cocciopesto mixes, for green building applications and the restoration of period and historic buildings and monuments.
Fibrostuck
White adhesive filler for filling and levelling cracks, fissures and minor surface irregularities in renders and façades, also in combination with Sanaxil Filler.
Fibrostuck
White adhesive filler for filling and levelling cracks, fissures and minor surface irregularities in renders and façades, also in combination with Sanaxil Filler.
Untersana
One-component premixed product for producing, with the sole addition of mixing water, bonding scratch coats to be applied before renovating, dehumidifying, thermal-insulating and anti-condensation renders; specifically Intosana, Sanatigh, Sanawarme and Caleosana, renders specially designed to ensure healthy indoor conditions in new buildings, for green building interventions on existing buildings and for the restoration of historic and monumental buildings. Also ideal as a mortar for the consolidating pointing of joints in brick, stone or mixed masonry, and as a render mortar, especially on damp masonry.
Untersana
One-component premixed product for producing, with the sole addition of mixing water, bonding scratch coats to be applied before renovating, dehumidifying, thermal-insulating and anti-condensation renders; specifically Intosana, Sanatigh, Sanawarme and Caleosana, renders specially designed to ensure healthy indoor conditions in new buildings, for green building interventions on existing buildings and for the restoration of historic and monumental buildings. Also ideal as a mortar for the consolidating pointing of joints in brick, stone or mixed masonry, and as a render mortar, especially on damp masonry.
Sanatigh
Macroporous, fibre-reinforced plaster based on natural hydraulic lime NHL 3.5, for dehumidification and hygrothermal remediation of buildings and masonry, in green building projects, new construction and the restoration of historic and monumental buildings.
Sanatigh
Macroporous, fibre-reinforced plaster based on natural hydraulic lime NHL 3.5, for dehumidification and hygrothermal remediation of buildings and masonry, in green building projects, new construction and the restoration of historic and monumental buildings.
Caleosana
Render for internal and external applications, macroporous, designed for sustainable construction, with high thermal-insulation performance, based on natural hydraulic lime NHL 3.5, siliceous aggregates, metakaolin and granular expanded silica with a very high volume of interconnected voids and a low elastic modulus. Its specific characteristics make it suitable for dehumidification and the thermal and hygrothermal rehabilitation of buildings and masonry, for sustainable construction projects and the restoration of historic and monumental buildings.
Caleosana
Render for internal and external applications, macroporous, designed for sustainable construction, with high thermal-insulation performance, based on natural hydraulic lime NHL 3.5, siliceous aggregates, metakaolin and granular expanded silica with a very high volume of interconnected voids and a low elastic modulus. Its specific characteristics make it suitable for dehumidification and the thermal and hygrothermal rehabilitation of buildings and masonry, for sustainable construction projects and the restoration of historic and monumental buildings.
Sanawarme
Mineral thermal insulating plaster for external wall insulation systems, macroporous, with high thermal insulation and sound absorption capacity, based on natural hydraulic lime NHL 3.5, hydraulic binders with a low soluble salt content, marble flour, kaolin, Vichy salt, expanded perlite, cork flour, natural anti-crack fibres and specific anti-salt agents. Used for the dehumidification and thermal and hygrometric rehabilitation of buildings and masonry, in sustainable building applications, new construction and the restoration of historic and monumental buildings. Specifically designed for the construction of “mineral external wall insulation systems”. Performance-guaranteed mortar/plaster with specific insulating properties in accordance with UNI EN 998/1: class T1 (highest thermal insulation class). Suitable, with the addition of water only, for producing lightweight screed underlays with high thermal insulation and sound absorption, in sustainable building applications and the restoration of historic and monumental buildings.
Sanawarme
Mineral thermal insulating plaster for external wall insulation systems, macroporous, with high thermal insulation and sound absorption capacity, based on natural hydraulic lime NHL 3.5, hydraulic binders with a low soluble salt content, marble flour, kaolin, Vichy salt, expanded perlite, cork flour, natural anti-crack fibres and specific anti-salt agents. Used for the dehumidification and thermal and hygrometric rehabilitation of buildings and masonry, in sustainable building applications, new construction and the restoration of historic and monumental buildings. Specifically designed for the construction of “mineral external wall insulation systems”. Performance-guaranteed mortar/plaster with specific insulating properties in accordance with UNI EN 998/1: class T1 (highest thermal insulation class). Suitable, with the addition of water only, for producing lightweight screed underlays with high thermal insulation and sound absorption, in sustainable building applications and the restoration of historic and monumental buildings.
Sanastof
Premixed mineral-based product formulated with NHL 3.5 natural hydraulic lime, pozzolanic microsilica, selected aggregates, high-toughness microfibres, and lightweight thermally insulating aggregates with a low elastic modulus. It is used for skim coating and levelling, both indoors and outdoors. It is perfectly compatible with a wide range of substrates: lime-based, lime-cement and cement renders, concrete, porous stone and masonry units. Its characteristics make it particularly suitable for green building applications and the restoration of historic and monumental buildings. The maximum aggregate size is 0.9 mm.
Sanastof
Premixed mineral-based product formulated with NHL 3.5 natural hydraulic lime, pozzolanic microsilica, selected aggregates, high-toughness microfibres, and lightweight thermally insulating aggregates with a low elastic modulus. It is used for skim coating and levelling, both indoors and outdoors. It is perfectly compatible with a wide range of substrates: lime-based, lime-cement and cement renders, concrete, porous stone and masonry units. Its characteristics make it particularly suitable for green building applications and the restoration of historic and monumental buildings. The maximum aggregate size is 0.9 mm.
Sanatrock SA
Powdered premix based on special binders and specific additives, to be added to predetermined quantities of clean, selected sand, for producing macroporous, dehumidifying and remedial renders on site, for green building applications and the restoration of historic and/or monumental buildings.
Sanatrock SA
Powdered premix based on special binders and specific additives, to be added to predetermined quantities of clean, selected sand, for producing macroporous, dehumidifying and remedial renders on site, for green building applications and the restoration of historic and/or monumental buildings.
Sanascreed
Walkable screed based on hydraulic lime, siliceous-calcareous aggregates with a maximum particle size of 5 mm and lightweight aggregates with pozzolanic activity, fibre-reinforced with polypropylene and glass microfibres. Used, with the sole addition of water, to construct strong screeds and subbases in green building applications and the restoration of historic and listed buildings.
Sanascreed
Walkable screed based on hydraulic lime, siliceous-calcareous aggregates with a maximum particle size of 5 mm and lightweight aggregates with pozzolanic activity, fibre-reinforced with polypropylene and glass microfibres. Used, with the sole addition of water, to construct strong screeds and subbases in green building applications and the restoration of historic and listed buildings.
Sanalit
Fiber-reinforced premixed product based on hydraulic lime, lightweight aggregates with high interconnected porosity and cork flour, for producing lightweight screeds and subfloors simply by adding water, offering high thermal and acoustic insulation, in green building applications and the restoration of period and monumental buildings. Sanalit screeds, mixed according to the specifications provided in this technical data sheet, are classified as C5-F1-A22 in accordance with European standard EN 13813.
Sanalit
Fiber-reinforced premixed product based on hydraulic lime, lightweight aggregates with high interconnected porosity and cork flour, for producing lightweight screeds and subfloors simply by adding water, offering high thermal and acoustic insulation, in green building applications and the restoration of period and monumental buildings. Sanalit screeds, mixed according to the specifications provided in this technical data sheet, are classified as C5-F1-A22 in accordance with European standard EN 13813.
Sanaglass
Binder, consolidating and evaporation-retarding solution with a vitrifying reaction, having a dense, syrupy appearance, consisting of natural minerals with simple molecular structure in aqueous dispersion. For producing insulating conglomerates based on natural cork granules, expanded perlite or EPS beads in energy-efficiency improvement projects and the restoration of historic and monumental buildings. For the surface consolidation of mortars and concrete, with an alkalising and protective function. For evaporation-retarding and consolidating treatment of new screed surfaces, cementitious floors and high-performance structural mortars (HPFRC).
Sanaglass
Binder, consolidating and evaporation-retarding solution with a vitrifying reaction, having a dense, syrupy appearance, consisting of natural minerals with simple molecular structure in aqueous dispersion. For producing insulating conglomerates based on natural cork granules, expanded perlite or EPS beads in energy-efficiency improvement projects and the restoration of historic and monumental buildings. For the surface consolidation of mortars and concrete, with an alkalising and protective function. For evaporation-retarding and consolidating treatment of new screed surfaces, cementitious floors and high-performance structural mortars (HPFRC).
Sanakoll
One-component adhesive–skim coat based on hydraulic lime, special flexible polymers, rheological additives, water-retaining agents, microsilicates with pozzolanic activity and spherical low-specific-weight aggregates. For smoothing and levelling a wide range of substrates, lightweight bonding and as a skim coat/adhesive for our special SANATEX membrane (on thermal bridges, damp and/or cracked masonry).
Sanakoll
One-component adhesive–skim coat based on hydraulic lime, special flexible polymers, rheological additives, water-retaining agents, microsilicates with pozzolanic activity and spherical low-specific-weight aggregates. For smoothing and levelling a wide range of substrates, lightweight bonding and as a skim coat/adhesive for our special SANATEX membrane (on thermal bridges, damp and/or cracked masonry).
SANASTUCK
Adhesive compound with high breathability and moldability, based on hydraulic lime, for the filling vanishing points between tiles etc. in horizontal and vertical applications, ecological building interventions, new buildings and in the restoration of vintage buildings and monuments.
SANASTUCK
Adhesive compound with high breathability and moldability, based on hydraulic lime, for the filling vanishing points between tiles etc. in horizontal and vertical applications, ecological building interventions, new buildings and in the restoration of vintage buildings and monuments.
Prerit Compound
Powdered additive compound for improving the performance and functional properties of concrete used to create architectural paving with landscape and environmental value, using the “washed gravel or exposed aggregate” technique.
Prerit Compound
Powdered additive compound for improving the performance and functional properties of concrete used to create architectural paving with landscape and environmental value, using the “washed gravel or exposed aggregate” technique.
Prerit Solution
Aqueous setting retarder to be applied by means of a low-pressure airless pump to fresh concrete surfaces, allowing a cortical layer a few millimetres thick to be removed by pressure washing, thereby exposing the aggregates forming the concrete mix. Specifically designed for the construction of aesthetically and environmentally valuable pavements using the “washed aggregate” technique.
Prerit Solution
Aqueous setting retarder to be applied by means of a low-pressure airless pump to fresh concrete surfaces, allowing a cortical layer a few millimetres thick to be removed by pressure washing, thereby exposing the aggregates forming the concrete mix. Specifically designed for the construction of aesthetically and environmentally valuable pavements using the “washed aggregate” technique.
Ghiaietto 6.10
Washed, cycloned, screened, dried and selected siliceous gravel, with a particle size ranging from 6 to 10 mm, specifically intended for addition to premixed structural mortars and renders, both flowable and thixotropic, in order to improve or correct the particle-size distribution curve according to the required increase in casting thickness.
Ghiaietto 6.10
Washed, cycloned, screened, dried and selected siliceous gravel, with a particle size ranging from 6 to 10 mm, specifically intended for addition to premixed structural mortars and renders, both flowable and thixotropic, in order to improve or correct the particle-size distribution curve according to the required increase in casting thickness.
Curing Aid
Curing aid and evaporation retarder based on special polymer resins in aqueous dispersion. Applied by spraying onto fresh concrete surfaces, it reduces the sudden loss of mixing water through evaporation, contributing to improved overall properties of the finished element. Unlike treatments based on waxes or synthetic oils, Curing Aid is not a water- and oil-repellent substance. Curing Aid works through the cross-linking of a copolymer with a particular affinity for the constituents of cement-based conglomerates. The copolymer inhibits water evaporation and chemically bonds to the substrate. Thanks to this polymerisation process, Curing Aid is not potentially release-inducing with respect to subsequent paint coatings.
Curing Aid
Curing aid and evaporation retarder based on special polymer resins in aqueous dispersion. Applied by spraying onto fresh concrete surfaces, it reduces the sudden loss of mixing water through evaporation, contributing to improved overall properties of the finished element. Unlike treatments based on waxes or synthetic oils, Curing Aid is not a water- and oil-repellent substance. Curing Aid works through the cross-linking of a copolymer with a particular affinity for the constituents of cement-based conglomerates. The copolymer inhibits water evaporation and chemically bonds to the substrate. Thanks to this polymerisation process, Curing Aid is not potentially release-inducing with respect to subsequent paint coatings.
QL Nano Lithium Hard
Lithium silicate chemical hardening, sealing and densifying treatment for existing concrete surfaces. It penetrates and seals the concrete by reacting chemically to form a durable, transparent, extremely hard, inorganic, breathable and abrasion-resistant surface. Excellent for concrete floors and walls requiring long-term protection against wear, exposure to adverse conditions, moisture, dirt accumulation, alkalinity and efflorescence (salt residue).
QL Nano Lithium Hard
Lithium silicate chemical hardening, sealing and densifying treatment for existing concrete surfaces. It penetrates and seals the concrete by reacting chemically to form a durable, transparent, extremely hard, inorganic, breathable and abrasion-resistant surface. Excellent for concrete floors and walls requiring long-term protection against wear, exposure to adverse conditions, moisture, dirt accumulation, alkalinity and efflorescence (salt residue).
QL Fluosil
Chemical/mechanical revitalising, dustproof hardener for concrete works, products, coatings and structures: consisting of an aqueous solution of mineral silicates and fluosilicates, activated by special wetting agents. Apply in several coats, with progressively lower dilution in water, using a stiff brush or mechanical scrubber-dryer. Specifically designed for dustproof treatments of industrial floors or concrete screeds that have lost their original “vitality”.
QL Fluosil
Chemical/mechanical revitalising, dustproof hardener for concrete works, products, coatings and structures: consisting of an aqueous solution of mineral silicates and fluosilicates, activated by special wetting agents. Apply in several coats, with progressively lower dilution in water, using a stiff brush or mechanical scrubber-dryer. Specifically designed for dustproof treatments of industrial floors or concrete screeds that have lost their original “vitality”.
QL Polisil
Impregnating agent based on the sodium salt of silicic acid in aqueous solution for the protective treatment of concrete. It drastically reduces the water permeability of the structure while maintaining water vapour permeability. Consequently, it increases resistance to acid attack and the durability of the concrete structure.
QL Polisil
Impregnating agent based on the sodium salt of silicic acid in aqueous solution for the protective treatment of concrete. It drastically reduces the water permeability of the structure while maintaining water vapour permeability. Consequently, it increases resistance to acid attack and the durability of the concrete structure.
Deterg-A
Concentrated solution of buffered acids and highly biodegradable anionic and non-ionic surfactants for the deep cleaning of substrates affected by various types of deposits (lime, gypsum, calcareous concretions and saltpetre). Apply after dilution with clean water according to the proportions indicated in the technical data sheet. The product attacks carbonate minerals; therefore, particular care must be taken with marble, calcareous stone, lead-polished floors and polished stone surfaces, carrying out appropriate preliminary assessments. Protect metal surfaces.
Deterg-A
Concentrated solution of buffered acids and highly biodegradable anionic and non-ionic surfactants for the deep cleaning of substrates affected by various types of deposits (lime, gypsum, calcareous concretions and saltpetre). Apply after dilution with clean water according to the proportions indicated in the technical data sheet. The product attacks carbonate minerals; therefore, particular care must be taken with marble, calcareous stone, lead-polished floors and polished stone surfaces, carrying out appropriate preliminary assessments. Protect metal surfaces.
Sanareg
Non-film-forming reactive liquid based on an alkylsilane emulsion dissolved in water, to be used to inhibit salt efflorescence in dehumidifying masonry renovation works, by spraying or application with a stiff-bristle brush. Sanareg penetrates the capillary pores of mineral substrates and reacts with the hydroxyl groups encountered along its path, forming an invisible water-repellent barrier that prevents water from reaching the surface, while leaving water-vapour permeability unchanged.
Sanareg
Non-film-forming reactive liquid based on an alkylsilane emulsion dissolved in water, to be used to inhibit salt efflorescence in dehumidifying masonry renovation works, by spraying or application with a stiff-bristle brush. Sanareg penetrates the capillary pores of mineral substrates and reacts with the hydroxyl groups encountered along its path, forming an invisible water-repellent barrier that prevents water from reaching the surface, while leaving water-vapour permeability unchanged.
Sanastark
Reactive mineral silicate solution capable of forming, through reaction with hydrated calcium salts and the moisture present in masonry, renders, stone substrates and concrete, binding and stabilising compounds for hardening and consolidating treatments. Suitable for preliminary treatments before subsequent plastering or skimming operations on powdery renders and mortars and masonry envelopes in general, for bio-building applications and for the restoration of historic and monumental buildings.
Sanastark
Reactive mineral silicate solution capable of forming, through reaction with hydrated calcium salts and the moisture present in masonry, renders, stone substrates and concrete, binding and stabilising compounds for hardening and consolidating treatments. Suitable for preliminary treatments before subsequent plastering or skimming operations on powdery renders and mortars and masonry envelopes in general, for bio-building applications and for the restoration of historic and monumental buildings.
Consilex San
Reactive, colourless mineral solution for the preliminary realkalisation and consolidation of concrete surfaces to be repaired. It is an inorganic, mineral compound chemically compatible with cementitious concrete. It reacts with alkalis, alkaline hydrates and water present in the pores of concrete, mortars and renders, forming stable silicate gels that hermetically and permanently seal the capillary network.
Consilex San
Reactive, colourless mineral solution for the preliminary realkalisation and consolidation of concrete surfaces to be repaired. It is an inorganic, mineral compound chemically compatible with cementitious concrete. It reacts with alkalis, alkaline hydrates and water present in the pores of concrete, mortars and renders, forming stable silicate gels that hermetically and permanently seal the capillary network.
Consilex ST
Penetrating transparent consolidant for natural stone, ornamental stone elements, mineral renders and, in general, for the restoration of cultural heritage. It consists of ethyl esters of silicic acid in a solvent, which harden through reaction with atmospheric moisture. It is applied by low-pressure spraying until the treated surfaces are saturated, ensuring extremely deep consolidation.
Consilex ST
Penetrating transparent consolidant for natural stone, ornamental stone elements, mineral renders and, in general, for the restoration of cultural heritage. It consists of ethyl esters of silicic acid in a solvent, which harden through reaction with atmospheric moisture. It is applied by low-pressure spraying until the treated surfaces are saturated, ensuring extremely deep consolidation.
Consilex Idrofix
Nanotechnology-based liquid product containing lithium silicates, ideal for the protective, consolidating, dustproofing and porosity-reducing treatment of concrete, mineral, brickwork and stone substrates and renders. It ensures excellent long-term strength and adhesion, resistance to UV radiation, chemical agents and mechanical stresses. Application rapidly hardens the surface while enhancing and homogenising its appearance, facilitating the subsequent application of other coating products. The product has a negligible environmental impact thanks to its low VOC content (< 50 g/l) and is virtually odourless.
Consilex Idrofix
Nanotechnology-based liquid product containing lithium silicates, ideal for the protective, consolidating, dustproofing and porosity-reducing treatment of concrete, mineral, brickwork and stone substrates and renders. It ensures excellent long-term strength and adhesion, resistance to UV radiation, chemical agents and mechanical stresses. Application rapidly hardens the surface while enhancing and homogenising its appearance, facilitating the subsequent application of other coating products. The product has a negligible environmental impact thanks to its low VOC content (< 50 g/l) and is virtually odourless.
Consilex Altrain
Colourless, non-film-forming water-repellent impregnating agent based on silanes and siloxanes in solvent. It protects renders, mortars, natural stone, tuff and other construction materials from the chemical and mechanical action of rainfall, freeze/thaw cycles, atmospheric pollutants and aggressive agents. From a functional standpoint, the pores and capillaries of treated materials are internally coated but not filled; therefore, no surface films are deposited, no colour changes occur, the appearance of the surfaces remains unaltered and the original water-vapour permeability is maintained. These characteristics, together with good chemical stability (against oxygen, UV radiation and pollutants) and the complete absence of harmful by-products, make the product suitable for application on various substrates, including works on historically and artistically valuable structures.
Consilex Altrain
Colourless, non-film-forming water-repellent impregnating agent based on silanes and siloxanes in solvent. It protects renders, mortars, natural stone, tuff and other construction materials from the chemical and mechanical action of rainfall, freeze/thaw cycles, atmospheric pollutants and aggressive agents. From a functional standpoint, the pores and capillaries of treated materials are internally coated but not filled; therefore, no surface films are deposited, no colour changes occur, the appearance of the surfaces remains unaltered and the original water-vapour permeability is maintained. These characteristics, together with good chemical stability (against oxygen, UV radiation and pollutants) and the complete absence of harmful by-products, make the product suitable for application on various substrates, including works on historically and artistically valuable structures.
Consilex No-Stain WV
Water- and oil-repellent, stain-resistant product with low environmental impact, particularly suitable for treating absorbent and porous materials. The active substance penetrates the absorbent mineral substrate by capillary impregnation, preserving its original appearance and protecting the treated material against salt efflorescence, oil, grease and aqueous solutions, without causing colour changes, altering water vapour permeability or creating glossy or sticky surfaces. Product compliant with FDA guidelines on contact with food substances.
Consilex No-Stain WV
Water- and oil-repellent, stain-resistant product with low environmental impact, particularly suitable for treating absorbent and porous materials. The active substance penetrates the absorbent mineral substrate by capillary impregnation, preserving its original appearance and protecting the treated material against salt efflorescence, oil, grease and aqueous solutions, without causing colour changes, altering water vapour permeability or creating glossy or sticky surfaces. Product compliant with FDA guidelines on contact with food substances.
Consilex EM Drop
Consilex EM Drop is a VOC-free aqueous silane emulsion used to make absorbent building materials water-repellent and confer a high pearl effect. A water-repellent, colourless, non-filming impregnator to protect plasters, cement systems, and so on, without altering the treated surfaces.
Consilex EM Drop
Consilex EM Drop is a VOC-free aqueous silane emulsion used to make absorbent building materials water-repellent and confer a high pearl effect. A water-repellent, colourless, non-filming impregnator to protect plasters, cement systems, and so on, without altering the treated surfaces.
Consilex Nanosil T-1000
Colourless, non-film-forming water- and oil-repellent impregnating agent based on a nanodispersion of silicon compounds. It protects lime-based renders, cementitious mortars, concrete, industrial floors, natural stone, brickwork, wood, etc. from weathering, freeze-thaw cycles and atmospheric pollutants. It does not alter the colour of the substrate or modify its original appearance and vapour permeability. The product is characterised by an extremely high beading effect (lotus flower effect) and excellent durability.
Consilex Nanosil T-1000
Colourless, non-film-forming water- and oil-repellent impregnating agent based on a nanodispersion of silicon compounds. It protects lime-based renders, cementitious mortars, concrete, industrial floors, natural stone, brickwork, wood, etc. from weathering, freeze-thaw cycles and atmospheric pollutants. It does not alter the colour of the substrate or modify its original appearance and vapour permeability. The product is characterised by an extremely high beading effect (lotus flower effect) and excellent durability.
Consilex Muffa Remover
Eco-friendly solution containing specific active ingredients for the elimination of biodeteriogenic growths—mould, fungi, moss, algae, lichens, bacteria, etc.—from masonry, in full compliance with ecological protocols, with particular reference to bio-building applications and the restoration of historic and monumental buildings. More than 150,000,000 square metres treated and over 30 years of experience guarantee the product’s quality and effectiveness. Consilex Muffa Remover is based on quaternary ammonium salts and is completely free from chlorine and caustic soda. To promote suitable environmental conditions on the treated substrate and help prevent the formation of mould and biodeteriogenic organisms, the product has been formulated for slow biodegradability.
Consilex Muffa Remover
Eco-friendly solution containing specific active ingredients for the elimination of biodeteriogenic growths—mould, fungi, moss, algae, lichens, bacteria, etc.—from masonry, in full compliance with ecological protocols, with particular reference to bio-building applications and the restoration of historic and monumental buildings. More than 150,000,000 square metres treated and over 30 years of experience guarantee the product’s quality and effectiveness. Consilex Muffa Remover is based on quaternary ammonium salts and is completely free from chlorine and caustic soda. To promote suitable environmental conditions on the treated substrate and help prevent the formation of mould and biodeteriogenic organisms, the product has been formulated for slow biodegradability.
Protech Oxicrom
Protech Oxicrom is an inorganic powder compound consisting primarily of iron oxides or oxyhydroxides. When added in suitable quantities and homogeneously distributed, it is ideal for pigmenting cementitious or similar mixes, renders and paints. Protech Oxicrom oxides are available in yellow, red, brown, green, blue, tobacco and black shades.
Protech Oxicrom
Protech Oxicrom is an inorganic powder compound consisting primarily of iron oxides or oxyhydroxides. When added in suitable quantities and homogeneously distributed, it is ideal for pigmenting cementitious or similar mixes, renders and paints. Protech Oxicrom oxides are available in yellow, red, brown, green, blue, tobacco and black shades.
Sanaxil Fix
Transparent consolidating fixing primer based on stabilised potassium silicate, for the preliminary treatment of surfaces to be painted and/or plastered with silicate-based systems and lime putty, in sustainable building projects, new construction and the restoration of historic and monumental buildings.
Sanaxil Fix
Transparent consolidating fixing primer based on stabilised potassium silicate, for the preliminary treatment of surfaces to be painted and/or plastered with silicate-based systems and lime putty, in sustainable building projects, new construction and the restoration of historic and monumental buildings.
Protech Sil Fix
Transparent consolidating fixing primer based on water-dispersed siloxane resins, specifically formulated for the preliminary treatment of renders before applying Protech Sil P or Protech Sil P - Therm siloxane paints, or before applying Protech Sil I or Protech Sil I - Therm siloxane textured finishes, in the renovation of residential and industrial buildings and in new construction.
Protech Sil Fix
Transparent consolidating fixing primer based on water-dispersed siloxane resins, specifically formulated for the preliminary treatment of renders before applying Protech Sil P or Protech Sil P - Therm siloxane paints, or before applying Protech Sil I or Protech Sil I - Therm siloxane textured finishes, in the renovation of residential and industrial buildings and in new construction.
Sanaxil Filler
Crack-bridging primer based on silica aggregates of different particle sizes, potassium silicate, nylon microfibres and specific agents, combined in a special formulation designed to ensure water impermeability, water repellency and vapour permeability. Specifically intended for the remediation of internal and external vertical surfaces characterised by significant shrinkage cracking (including cracks up to 1 mm wide), and for general homogeneous surface levelling. It can also be used as a primer to obtain a rustic finish effect. Particularly suitable for crack remediation in historic buildings.
Sanaxil Filler
Crack-bridging primer based on silica aggregates of different particle sizes, potassium silicate, nylon microfibres and specific agents, combined in a special formulation designed to ensure water impermeability, water repellency and vapour permeability. Specifically intended for the remediation of internal and external vertical surfaces characterised by significant shrinkage cracking (including cracks up to 1 mm wide), and for general homogeneous surface levelling. It can also be used as a primer to obtain a rustic finish effect. Particularly suitable for crack remediation in historic buildings.
Sanafarbe I
Natural, mineral, protective, decorative, breathable, pigmented, non-toxic, naturally mould-resistant finish coat for interior and exterior use, based on matured lime putty, aggregates with a rationally graded particle-size distribution and marble powder. Formulated according to traditional recipes for use in bio-building applications and the restoration of period and monumental buildings.
Sanafarbe I
Natural, mineral, protective, decorative, breathable, pigmented, non-toxic, naturally mould-resistant finish coat for interior and exterior use, based on matured lime putty, aggregates with a rationally graded particle-size distribution and marble powder. Formulated according to traditional recipes for use in bio-building applications and the restoration of period and monumental buildings.
Sanafarbe P
Breathable, natural, non-toxic, diffusion-type lime putty paint for interior and exterior use. A mineral-based formulation prepared according to traditional recipes, offering high natural mould-resistant properties thanks to the alkalinity of the lime putty, for use in bio-building projects and the restoration of period and monumental buildings.
Sanafarbe P
Breathable, natural, non-toxic, diffusion-type lime putty paint for interior and exterior use. A mineral-based formulation prepared according to traditional recipes, offering high natural mould-resistant properties thanks to the alkalinity of the lime putty, for use in bio-building projects and the restoration of period and monumental buildings.
PROTECH WOODPAINT
Transparent glossy or satin finish, designed to protect the wood as well as to enhance its natural beauty. High quality, elastic with excellent adhesion to the support and surface hardness, it is soft to the touch. Suitable for indoor or outdoor use, it offers a lot of resistance to U.V. being equipped with radical catchers and film protectors, able to prevent the deterioration of the wood. It resists well to pollutants and abrasion from atmospheric dust, ensuring total protection of the wood against mold and parasites. Be careful with particular wood essences very rich in "LIGNINA". Especially for light colors and wood whitening, a pre-treatment with a suitable product is essential, in order to avoid unsightly yellowish stains.
PROTECH WOODPAINT
Transparent glossy or satin finish, designed to protect the wood as well as to enhance its natural beauty. High quality, elastic with excellent adhesion to the support and surface hardness, it is soft to the touch. Suitable for indoor or outdoor use, it offers a lot of resistance to U.V. being equipped with radical catchers and film protectors, able to prevent the deterioration of the wood. It resists well to pollutants and abrasion from atmospheric dust, ensuring total protection of the wood against mold and parasites. Be careful with particular wood essences very rich in "LIGNINA". Especially for light colors and wood whitening, a pre-treatment with a suitable product is essential, in order to avoid unsightly yellowish stains.
SANAFARBE MARMORINO FINITURA
Thick-layer, trowel-applied finishing coating imitating marble, available in glossy or matt finishes, for exterior and interior use. Breathable and water-repellent, it is based on lime putty, micronised marble powder and specific additives. Resistant to mould and non-absorbent with respect to soiling. Available in various colours, with a wide range of shades that can be formulated on request.
SANAFARBE MARMORINO FINITURA
Thick-layer, trowel-applied finishing coating imitating marble, available in glossy or matt finishes, for exterior and interior use. Breathable and water-repellent, it is based on lime putty, micronised marble powder and specific additives. Resistant to mould and non-absorbent with respect to soiling. Available in various colours, with a wide range of shades that can be formulated on request.
Sanavel
Natural, non-toxic, breathable interior paint based on potassium silicates. Mineral-based, active formulation with high mould-resistant and anti-condensation properties, prepared according to traditional recipes for use in green building projects, new construction and the restoration of historic and listed buildings.
Sanavel
Natural, non-toxic, breathable interior paint based on potassium silicates. Mineral-based, active formulation with high mould-resistant and anti-condensation properties, prepared according to traditional recipes for use in green building projects, new construction and the restoration of historic and listed buildings.
Sanaxil P
Natural, protective, decorative, breathable, pigmented, non-toxic, anti-mould paint based on stabilised potassium silicates, for interior and exterior use. Its essentially mineral formulation, thanks to the naturally alkaline pH of potassium silicate, provides strong antibacterial and anti-mould action. Sanaxil P is a versatile and effective product for various applications: in green building projects, new construction and the restoration of historic and monumental buildings.
Sanaxil P
Natural, protective, decorative, breathable, pigmented, non-toxic, anti-mould paint based on stabilised potassium silicates, for interior and exterior use. Its essentially mineral formulation, thanks to the naturally alkaline pH of potassium silicate, provides strong antibacterial and anti-mould action. Sanaxil P is a versatile and effective product for various applications: in green building projects, new construction and the restoration of historic and monumental buildings.
Sanaxil P - Therm
Mineral potassium silicate paint for interior and exterior use, offering outstanding adhesion to porous substrates through both mineral combination and chemical bonding. It combines anti-condensation and insulating properties (thanks to the presence of hollow glass microspheres 3M Glass Bubble in the formulation – thermal conductivity 0.08 W/mK) with high resistance to mould and microorganisms (thanks to the naturally alkaline pH of potassium silicate) and excellent hiding power (Class 1 according to EN 13300, with a coverage rate of 6–7 m2/l). Due to its mineral nature, Sanaxil P - Therm revolutionises the concept of adhesion to the substrate, penetrating deeply into the wall pores and then reacting with its components to form a unique, indissoluble silicate bond.
Sanaxil P - Therm
Mineral potassium silicate paint for interior and exterior use, offering outstanding adhesion to porous substrates through both mineral combination and chemical bonding. It combines anti-condensation and insulating properties (thanks to the presence of hollow glass microspheres 3M Glass Bubble in the formulation – thermal conductivity 0.08 W/mK) with high resistance to mould and microorganisms (thanks to the naturally alkaline pH of potassium silicate) and excellent hiding power (Class 1 according to EN 13300, with a coverage rate of 6–7 m2/l). Due to its mineral nature, Sanaxil P - Therm revolutionises the concept of adhesion to the substrate, penetrating deeply into the wall pores and then reacting with its components to form a unique, indissoluble silicate bond.
Sanaxil I
Natural, protective, decorative, breathable, pigmented, non-toxic, mould-resistant render based on stabilised potassium silicates, for interior and exterior use. A substantially mineral formulation which, thanks to the naturally alkaline pH of potassium silicate, provides a powerful antibacterial and mould-resistant action. Sanaxil I is a versatile and effective product for a range of applications: in bio-building projects, new construction and the restoration of period and listed buildings.
Sanaxil I
Natural, protective, decorative, breathable, pigmented, non-toxic, mould-resistant render based on stabilised potassium silicates, for interior and exterior use. A substantially mineral formulation which, thanks to the naturally alkaline pH of potassium silicate, provides a powerful antibacterial and mould-resistant action. Sanaxil I is a versatile and effective product for a range of applications: in bio-building projects, new construction and the restoration of period and listed buildings.
Sanaxil I - Therm
Trowel-applied mineral coating for interior and exterior use, based on potassium silicates, with outstanding adhesion to porous substrates, achieved through both mineral interlocking and chemical bonding. It combines anti-condensation and insulating properties (thanks to the inclusion of hollow glass microspheres, 3M Glass Bubble – thermal conductivity 0.08 W /mK) with high resistance to mould and microorganisms (thanks to the naturally alkaline pH of potassium silicate). Due to its mineral nature, Sanaxil I - Therm revolutionises the concept of substrate adhesion, penetrating deeply into the wall pores and then reacting with its components to form a unique, insoluble silicate bond. The final appearance of Sanaxil I THERM depends on the different available grain sizes and is generally similar to that of a traditional plaster finish.
Sanaxil I - Therm
Trowel-applied mineral coating for interior and exterior use, based on potassium silicates, with outstanding adhesion to porous substrates, achieved through both mineral interlocking and chemical bonding. It combines anti-condensation and insulating properties (thanks to the inclusion of hollow glass microspheres, 3M Glass Bubble – thermal conductivity 0.08 W /mK) with high resistance to mould and microorganisms (thanks to the naturally alkaline pH of potassium silicate). Due to its mineral nature, Sanaxil I - Therm revolutionises the concept of substrate adhesion, penetrating deeply into the wall pores and then reacting with its components to form a unique, insoluble silicate bond. The final appearance of Sanaxil I THERM depends on the different available grain sizes and is generally similar to that of a traditional plaster finish.
Protech Sil P
Pigmented, water-repellent and breathable paint based on siloxane resins in aqueous dispersion, for the painting and remediation of civil and industrial buildings, both new and existing, for external façades and interior environments. Recommended as a breathable, water-repellent protective finish for macroporous dehumidifying renders (Sanatigh, Sanawarme, Caleosana).
Protech Sil P
Pigmented, water-repellent and breathable paint based on siloxane resins in aqueous dispersion, for the painting and remediation of civil and industrial buildings, both new and existing, for external façades and interior environments. Recommended as a breathable, water-repellent protective finish for macroporous dehumidifying renders (Sanatigh, Sanawarme, Caleosana).
Protech Sil P - Therm
Anti-condensation, elastic, sanitising and heat-reflective paint containing hollow glass microspheres (3M Glass Bubble – thermal conductivity 0.08 W/mK), ideal for both external façades and interior spaces. It is based on an emulsion of siloxane resin, with high water-vapour permeability and excellent hiding power. Recommended as a breathable, water-repellent protective finish for macroporous dehumidifying plasters (Sanatigh, Sanawarme, Caleosana).
Protech Sil P - Therm
Anti-condensation, elastic, sanitising and heat-reflective paint containing hollow glass microspheres (3M Glass Bubble – thermal conductivity 0.08 W/mK), ideal for both external façades and interior spaces. It is based on an emulsion of siloxane resin, with high water-vapour permeability and excellent hiding power. Recommended as a breathable, water-repellent protective finish for macroporous dehumidifying plasters (Sanatigh, Sanawarme, Caleosana).
Protech Sil I
Water-repellent, vapour-permeable, pigmented, ready-to-use textured finish based on water-dispersed siloxane resins. Ideal for water- and weather-resistant protective finishes in renovation works, both on external façades and in interior spaces, in civil and industrial buildings, as well as in new construction.
Protech Sil I
Water-repellent, vapour-permeable, pigmented, ready-to-use textured finish based on water-dispersed siloxane resins. Ideal for water- and weather-resistant protective finishes in renovation works, both on external façades and in interior spaces, in civil and industrial buildings, as well as in new construction.
Protech Sil I - Therm
Nanotechnology trowel-applied wall coating for interior and exterior use, anti-condensation, elastomeric, sanitising and thermally insulating, formulated with hollow glass microspheres (3M Glass Bubble – thermal conductivity 0.08 W/mK), heat-reflective and based on siloxane resins in aqueous emulsion with high water vapour permeability, providing a final appearance similar to traditional render. It enables thermal insulation to be achieved, with the clear benefits of recovering the thermal mass of the walls and eliminating thermal bridges and temperature fluctuations in buildings.
Protech Sil I - Therm
Nanotechnology trowel-applied wall coating for interior and exterior use, anti-condensation, elastomeric, sanitising and thermally insulating, formulated with hollow glass microspheres (3M Glass Bubble – thermal conductivity 0.08 W/mK), heat-reflective and based on siloxane resins in aqueous emulsion with high water vapour permeability, providing a final appearance similar to traditional render. It enables thermal insulation to be achieved, with the clear benefits of recovering the thermal mass of the walls and eliminating thermal bridges and temperature fluctuations in buildings.
Armaglass 160
Anti-crack reinforcement mesh made from alkali-resistant glass fibre yarns, designed for improved stress distribution and to prevent shrinkage cracking caused by thermal fluctuations, surface irregularities, etc. With a weight of 160 g/m² and a 4.5 x 4.5 mm square mesh, Armaglass 160 is the ideal glass fibre mesh for reinforced skim coats.
Armaglass 160
Anti-crack reinforcement mesh made from alkali-resistant glass fibre yarns, designed for improved stress distribution and to prevent shrinkage cracking caused by thermal fluctuations, surface irregularities, etc. With a weight of 160 g/m² and a 4.5 x 4.5 mm square mesh, Armaglass 160 is the ideal glass fibre mesh for reinforced skim coats.
Microsil 90 Bianco
Selected white microsilica (silica fume) for producing high-density, high-performance concrete mixes (water impermeability, chemical stability, mechanical strength, etc.), as well as sulphate-resistant, anti-washout mortars, renders, fine-grained concrete and concrete. Microsil 90 Bianco is a very fine white powder with a particle size below 30 μm (more than 99% passing the 25 μm sieve).
Microsil 90 Bianco
Selected white microsilica (silica fume) for producing high-density, high-performance concrete mixes (water impermeability, chemical stability, mechanical strength, etc.), as well as sulphate-resistant, anti-washout mortars, renders, fine-grained concrete and concrete. Microsil 90 Bianco is a very fine white powder with a particle size below 30 μm (more than 99% passing the 25 μm sieve).